Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/D5RA90017D
(Correction)
RSC Adv., 2025, 15, 6183-6183
Correction: Facile synthesis of an α-Fe2O3–TiO2-MXene heterojunction for enhanced acetone gas sensors
Zhenyuan Yangab and
Ying Chen*ab
aSchool of Science, Hubei University of Technology, Wuhan 430068, China. E-mail: chenying@hbut.edu.cn
bHubei Engineering Technology Research Center of Energy Photoelectric Device and System, Hubei University of Technology, Wuhan 430068, China
Received
14th February 2025
, Accepted 14th February 2025
First published on 25th February 2025
Abstract
Correction for ‘Facile synthesis of an α-Fe2O3–TiO2-MXene heterojunction for enhanced acetone gas sensors’ by Zhenyuan Yang et al., RSC Adv., 2025, 15, 3040–3046, https://doi.org/10.1039/D4RA08407A.
The authors regret that an incorrect version of Fig. 6 was included in the original article. The correct version of Fig. 6 is presented below.
 | ||
| Fig. 6 (a) Response values of α-Fe2O3, M-F-0.01, M-F-0.03, M-F-0.05, and M-F-0.1 to 50 ppm acetone at different temperatures. The error bar is from the mean values and standard deviations of three tested groups of gas sensors under the same experimental conditions. (b) Dynamic response values to different concentrations of acetone at 150 °C. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2025 |