Issue 4, 2022

Molecular identification guided process design for deep removal of fluoride from electroplating effluent

Abstract

Fluoride was ubiquitous in effluents from various industries; however its specification in wastewater was poorly understood, hindering the rational design of a water defluoridation process. In this study, we developed a molecular identification method for fluoride in industrial wastewater by combining NMR analysis and chemical tests. Given the complicated composition and the huge quantity, electroplating effluents were chosen as the representative of fluoride-containing wastewater. 19F NMR analysis suggested F and BF4 as the two main fluoride forms in raw wastewater and effluents from wastewater treatment sections, and chemical tests suggested F concentration in the effluents ranging from 5.1 to 7.3 mg L−1. We also explored the adsorptive removal of BF4 by using the strongly basic ion exchange resin D201, i.e., quaternary ammonated poly (styrene-co-divinylbenzene) beads. The adsorption of D201 toward BF4 followed pseudo-first-order kinetics (k1 = 2.45 h−1) with an equilibrium time of less than 3 h. Adsorption isotherms were fitted well with the Langmuir model, with the maximum adsorption capacity of 257.25 mg g−1 at 298 K. D201 exhibited a greatly enhanced adsorption selectivity toward BF4 compared to common anions including Cl and SO2−4, mainly owing to the low hydration energy (ΔGhyd° = −220 kJ mol−1) of BF4. In the fixed-bed mode, the D201 column could generate 850 and 460 bed volume (BV) clean water ([BF4] < 1.5 mg-F/L) from synthetic and realistic electroplating effluents, respectively. The exhausted D201 column was fully refreshed with NaCl solution for five defluoridation cycles with a constant effective treatment amount of ∼1400 BV.

Graphical abstract: Molecular identification guided process design for deep removal of fluoride from electroplating effluent

Supplementary files

Article information

Article type
Paper
Submitted
01 Leq 2022
Accepted
19 Leq 2022
First published
19 Leq 2022
This article is Open Access
Creative Commons BY-NC license

Environ. Sci.: Adv., 2022,1, 584-593

Molecular identification guided process design for deep removal of fluoride from electroplating effluent

X. Wei, N. Xu, A. Xu and X. Zhang, Environ. Sci.: Adv., 2022, 1, 584 DOI: 10.1039/D2VA00177B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements