Issue 48, 2023

Dopant engineering for ZnO electron transport layer towards efficient perovskite solar cells

Abstract

The conventional electron transport layer (ETL) TiO2 has been widely used in perovskite solar cells (PSCs), which have produced exceptional power conversion efficiencies (PCE), allowing the technology to be highly regarded and propitious. Nevertheless, the recent high demand for energy harvesters in wearable electronics, aerospace, and building integration has led to the need for flexible solar cells. However, the conventional TiO2 ETL layer is less preferred, where a crystallization process at a temperature as high as 450 °C is required, which degrades the plastic substrate. Zinc oxide nanorods (ZnO NRs) as a simple and low-cost fabrication material may fulfil the need as an ETL, but they still suffer from low PCE due to atomic defect vacancy. To delve into the issue, several dopants have been reviewed as an additive to passivate or substitute the Zn2+ vacancies, thus enhancing the charge transport mechanism. This work thereby unravels and provides a clear insight into dopant engineering in ZnO NRs ETL for PSC.

Graphical abstract: Dopant engineering for ZnO electron transport layer towards efficient perovskite solar cells

Article information

Article type
Review Article
Submitted
18 Qad 2023
Accepted
30 Dit 2023
First published
17 Xim 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 33797-33819

Dopant engineering for ZnO electron transport layer towards efficient perovskite solar cells

N. A. Zainal Abidin, F. Arith, N. S. Noorasid, H. Sarkawi, A. N. Mustafa, N. E. Safie, A. S. M. Shah, M. A. Azam, P. Chelvanathan and N. Amin, RSC Adv., 2023, 13, 33797 DOI: 10.1039/D3RA04823C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements