Issue 13, 2024

A one-step method for generating antimicrobial nanofibre meshes via coaxial electrospinning

Abstract

Respiratory diseases, including influenza, infectious pneumonia, and severe acute respiratory syndrome (SARS), are a leading cause of morbidity and mortality worldwide. The recent COVID-19 pandemic claimed over 6.9 million lives globally. With the possibility of future pandemics, the creation of affordable antimicrobial meshes for protective gear, such as facemasks, is essential. Electrospinning has been a focus for much of this research, but most approaches are complex and expensive, often wasting raw materials by distributing antiviral agents throughout the mesh despite the fact they can only be active if at the fibre surface. Here, we report a low cost and efficient one-step method to produce nanofibre meshes with antimicrobial activity, including against SARS-CoV-2. Cetrimonium bromide (CTAB) was deposited directly onto the surface of polycaprolactone (PCL) fibres by coaxial electrospinning. The CTAB-coated samples have denser meshes with finer nanofibres than non-coated PCL fibres (mean diameter: ∼300 nm versus ∼900 nm, with mean pore size: ∼300 nm versus > 600 nm). The formulations have > 90% coating efficiency and exhibit a burst release of CTAB upon coming into contact with aqueous media. The CTAB-coated materials have strong antibacterial activity against Staphylococcus aureus (ca. 100%) and Pseudomonas aeruginosa (96.5 ± 4.1%) bacteria, as well as potent antiviral activity with over 99.9% efficacy against both respiratory syncytial virus and SARS-CoV-2. The CTAB-coated nanofibre mesh thus has great potential to form a mask material for preventing both bacterial and viral respiratory infections.

Graphical abstract: A one-step method for generating antimicrobial nanofibre meshes via coaxial electrospinning

Supplementary files

Article information

Article type
Paper
Submitted
08 Nah 2024
Accepted
18 Cax 2024
First published
20 Cax 2024
This article is Open Access
Creative Commons BY license

Mater. Adv., 2024,5, 5561-5571

A one-step method for generating antimicrobial nanofibre meshes via coaxial electrospinning

F. Zhang, A. I. Jacobs, M. Woodall, H. C. Hailes, I. F. Uchegbu, D. Fernandez-Reyes, C. M. Smith, K. Dziemidowicz and G. R. Williams, Mater. Adv., 2024, 5, 5561 DOI: 10.1039/D4MA00125G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements