Issue 2, 2020

Inkjet printed mesoscopic perovskite solar cells with custom design capability

Abstract

Customizable solar cells are required for aesthetic indoor and outdoor photovoltaic deployment as well as for the freedom of design of small and portable power supplies. We demonstrate that drop on demand inkjet printing can be used for the fabrication of monolithic mesoscopic carbon-based perovskite solar cells by printing all of the oxide layers in the stack as well as the organo-metal halide absorber. Printable inks using environmentally friendly solvents and jetting parameters were developed in order to achieve homogenous and continuous functional layers of the photovoltaic stack. Inkjet printed cells are compared to those obtained from the standard screen-printing route. As a proof of principle, photovoltaic cells with an area of 1.5 cm2 and a performance of 9.1% were realized by inkjet printing, which opens up intriguing application possibilities.

Graphical abstract: Inkjet printed mesoscopic perovskite solar cells with custom design capability

Supplementary files

Article information

Article type
Communication
Submitted
04 মার্চ 2020
Accepted
24 এপ্রিল 2020
First published
24 এপ্রিল 2020
This article is Open Access
Creative Commons BY license

Mater. Adv., 2020,1, 153-160

Inkjet printed mesoscopic perovskite solar cells with custom design capability

A. Verma, D. Martineau, S. Abdolhosseinzadeh, J. Heier and F. Nüesch, Mater. Adv., 2020, 1, 153 DOI: 10.1039/D0MA00077A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements