Issue 8, 2016

Improving charge collection with delafossite photocathodes: a host–guest CuAlO2/CuFeO2 approach

Abstract

p-Type delafossite CuFeO2 has recently been reported as a promising candidate for direct photoelectrochemical solar water reduction in alkaline conditions. However, despite its favorable optical band gap energy and light absorption, this material suffers from poor electron–hole separation that limits its optimum thickness to a few hundred nanometers. This limitation can be addressed by a host–guest strategy, where a mesoporous p-type scaffold is used to support a thin-film of the light absorber. Here we demonstrate this host–guest approach for the first time with CuFeO2 using p-type transparent CuAlO2 as a scaffold. Optimizing the scaffold layer thickness at 2 μm resulted in a 2.4-fold increase in photocurrent in the presence of O2—a sacrificial electron scavenger—reaching 2.4 mA cm−2 at +0.4 V vs. RHE. Moreover, comparing the performance to host–guest electrodes prepared with an insulating SiO2 scaffold as a control suggested that the observed improvement with CuAlO2 was due to a decreased recombination stemming from improved charge separation in addition to improved charge transport through the scaffold compared to the CuFeO2 film alone.

Graphical abstract: Improving charge collection with delafossite photocathodes: a host–guest CuAlO2/CuFeO2 approach

Supplementary files

Article information

Article type
Paper
Submitted
12 avq 2015
Accepted
09 sen 2015
First published
10 sen 2015

J. Mater. Chem. A, 2016,4, 3018-3026

Improving charge collection with delafossite photocathodes: a host–guest CuAlO2/CuFeO2 approach

M. S. Prévot, Y. Li, N. Guijarro and K. Sivula, J. Mater. Chem. A, 2016, 4, 3018 DOI: 10.1039/C5TA06336A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements