Issue 19, 2017

A simplified approach in flow controlled multi-dimensional gas chromatography

Abstract

We introduce a simple and reliable approach for practicing flow controlled multi-dimensional gas chromatography. The approach eliminates the need for flow resistance balancing. Flow resistance balancing between the flow restrictor and the analytical column employed in the second dimension has been viewed as a necessary requirement for appropriate Deans switch operation. It is a time consuming step and at times can be difficult to implement especially without a software calculator. The proposed approach is made possible by recent advances in fast pneumatic control systems that are capable of delivering a rapid response to abrupt flow changes. It can be employed in a Deans switch configuration or have the Deans switch act as a generic flow switch to satisfy dissimilar detector flow requirements. Over a carbon number range of nC8 to nC24, a relative standard deviation of less than 0.02% for retention time and less than 4% for area counts was obtained for both the compounds that were “cut” to the second dimension as well as for those remained in the first dimension. In the present article, the utility of the simplified approach was demonstrated with a capillary flow technology based Deans switch with two detectors: an atmospheric pressure flame ionization detector and a reduced pressure mass selective detector. In this configuration, the flow rate of the restrictor is approximately six times higher than the flow rate of the secondary column.

Graphical abstract: A simplified approach in flow controlled multi-dimensional gas chromatography

Article information

Article type
Paper
Submitted
17 fev 2017
Accepted
11 apr 2017
First published
17 apr 2017

Anal. Methods, 2017,9, 2835-2839

A simplified approach in flow controlled multi-dimensional gas chromatography

J. Luong, R. Gras and R. A. Shellie, Anal. Methods, 2017, 9, 2835 DOI: 10.1039/C7AY00433H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements