Issue 16, 2022

Surface defect-regulated PdCu/TiO2−x promoting efficient electrocatalytic nitrogen reduction

Abstract

Due to the utilization of renewable energy and proton sources, the electrochemical nitrogen reduction reaction is considered as an efficient, sustainable, and carbon-neutral route to replace the industrial Haber–Bosch process. However, restricted by the highly competitive hydrogen evolution reaction and the highly inert N[triple bond, length as m-dash]N bond, electrochemical nitrogen reduction research still faces significant challenges with a low level of selectivity and activity. Herein, we demonstrate a catalyst (PdCu/TiO2−x) composed of oxygen vacancy-rich TiO2−x nanosheets and PdCu alloy nanoparticles by the co-reduction method of metal precursors. Such a catalyst exhibits excellent electrocatalytic performance at room temperature and pressure, with an NH3 yield rate of 8.51 mmol gcat−1 h−1 and the corresponding faradaic efficiency of 49.09% at −0.1 V vs. the reversible hydrogen electrode, which are much higher than most reported palladium-based catalysts and their alloy catalysts. Characterization and experimental results confirm that by properly constructing the surface defect and nanoalloy structure, the optimized electronic structure and synergistic effect can not only effectively improve the N2 adsorption and activation, but also reduce the reaction barrier, resulting in efficient electrocatalytic performance. Meanwhile, the introduction of Cu accelerates the hydrogen desorption, further effectively improving the faradaic efficiency. Overall, we explored the electrocatalytic performance and mechanism of the bimetal alloy catalyst, as well as the optimization strategies for enhancing the nitrogen mass transfer process, providing new insight into the rational design of a highly efficient e-NRR system through tuning of the catalyst and reaction environment.

Graphical abstract: Surface defect-regulated PdCu/TiO2−x promoting efficient electrocatalytic nitrogen reduction

Supplementary files

Article information

Article type
Research Article
Submitted
17 may 2022
Accepted
27 iyn 2022
First published
29 iyn 2022

Mater. Chem. Front., 2022,6, 2190-2200

Surface defect-regulated PdCu/TiO2−x promoting efficient electrocatalytic nitrogen reduction

C. Liu, X. Guo, Z. Huang, J. Li, L. Gan, L. Pan, C. Shi, X. Zhang, G. Yang and J. Zou, Mater. Chem. Front., 2022, 6, 2190 DOI: 10.1039/D2QM00453D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements