Issue 6, 2015

Single particle ICP-MS combined with a data evaluation tool as a routine technique for the analysis of nanoparticles in complex matrices

Abstract

Detection and characterization of nanoparticles (NPs) in complex media as consumer products, food and toxicological test media is an essential part of understanding the potential benefits and risks of the application of nanoparticles. Single particle ICP-MS (spICP-MS) was studied as a screening tool for the detection and characterization of nanoparticles in complex matrices such as food and biological tissues. A data evaluation tool was created for the calculation of particle size, concentration and size distribution from the raw data. spICP-MS measurements were carried out on a standard quadrupole instrument as well as on a sector-field instrument. Performance characteristics were determined for four types of NPs. For the quadrupole instrument the size detection limits were 20 nm (Au and Ag), 50 (TiO2) and 200 nm (SiO2). For the sector-field instrument size detection limits are lower, 10 nm (Au). Concentration detection limits ranged from 1 ng L−1 for 60 nm Au NPs to 0.1 μg L−1 for 500 nm SiO2 particles. The dynamic range of spICP-MS is limited to two orders of magnitude and as a consequence sample dilution is often required. The precision of the method was found to be <5% and <10% for the determination of particle size and concentration, respectively while the accuracy for particle size (Au NP only) was <10%. The robustness against potential sample matrix components was investigated. The applicability to routine samples was demonstrated by four examples (food, waste water, culture media and biological tissues). The presented combination of spICP-MS measurements with a powerful data evaluation tool enables the use of this technique as a fast, cost efficient and easy to use screening tool for metal and metal oxide NPs that can be widely implemented in the statutory monitoring of food and consumer products for the presence of NPs, as well as in the analytical evaluation of toxicological studies.

Graphical abstract: Single particle ICP-MS combined with a data evaluation tool as a routine technique for the analysis of nanoparticles in complex matrices

Article information

Article type
Paper
Submitted
22 okt 2014
Accepted
16 yan 2015
First published
28 yan 2015

J. Anal. At. Spectrom., 2015,30, 1274-1285

Author version available

Single particle ICP-MS combined with a data evaluation tool as a routine technique for the analysis of nanoparticles in complex matrices

R. Peters, Z. Herrera-Rivera, A. Undas, M. van der Lee, H. Marvin, H. Bouwmeester and S. Weigel, J. Anal. At. Spectrom., 2015, 30, 1274 DOI: 10.1039/C4JA00357H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements