Issue 40, 2015

MoSi2-type narrow band gap intermetallic compound Al6Re5Si4 as a thermoelectric material

Abstract

The thermoelectric properties of MoSi2-type intermetallic compound Al6Re5Si4 (investigated compositions: Al6−xRe4.7Si4+x (x = 0–0.9)) related to TiSi2-type narrow band gap intermetallic compounds were systematically investigated. A first-principles band structure calculation implies that this compound forms a narrow band gap in the electronic density of states that will be suitable for obtaining a large power factor. Indeed, the maximum power factor is 1.65 mW m−1 K−2 for the sample with x = 0.8. The Al6−xRe4.7Si4+x (x = 0–0.8) samples show degenerate semiconductor behavior as p-type materials; the temperature coefficient of the electrical conductivity is negative and the positive Seebeck coefficient increases with increasing temperature. A negative Seebeck coefficient is observed in the Si-rich sample with x = 0.9, which is understood by shifting the Fermi level to the conduction band. The estimated band gap is 0.53 eV from the Arrhenius plot. Because of a simple crystal structure, a relatively high thermal conductivity ranging from 7.6 to 13.5 W m−1 K−1 is observed at 300 K. The maximum dimensionless figure-of-merit of 0.19 at 973 K is close to the optimal value predicted by a single parabolic band model.

Graphical abstract: MoSi2-type narrow band gap intermetallic compound Al6Re5Si4 as a thermoelectric material

Article information

Article type
Paper
Submitted
03 iyn 2015
Accepted
23 iyn 2015
First published
07 iyl 2015

J. Mater. Chem. C, 2015,3, 10422-10429

Author version available

MoSi2-type narrow band gap intermetallic compound Al6Re5Si4 as a thermoelectric material

Y. Takagiwa, S. Utada, I. Kanazawa and K. Kimura, J. Mater. Chem. C, 2015, 3, 10422 DOI: 10.1039/C5TC01608H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements