Issue 3, 2017

Ultrasensitive and stretchable resistive strain sensors designed for wearable electronics

Abstract

Advanced wearable sensors for human motion detection are receiving growing attention and have great potential for future electronics. Herein, we demonstrate microcrack-assisted strain sensors using silver nanowires@patterned polydimethylsiloxane. Through designed percolating network microstructures, the strain sensors have significant inherent advantages, including simple fabrication processes and ultrahigh sensitivity far surpassing other stretchable sensing devices. Noteworthily, the strain sensors possess a tremendous gauge factor (GF) of 150 000 within a large stretchability of 60% strain range. The sensing mechanism depends on the change in electrical resistance, which is dramatically affected by a percolating-microcrack surface microstructure in the case of strain concentration of mechanical deformation. The superior sensing performance in conjunction with an appealing stretchability, reversibility, low creep and ultrahigh stability enables the strain sensors to act as wearable monitors and electronic skins for diverse applications, including but not limited to full-range detection of human body motions, as well as visual control of a light-emitting diode indicator, etc.

Graphical abstract: Ultrasensitive and stretchable resistive strain sensors designed for wearable electronics

Supplementary files

Article information

Article type
Communication
Submitted
07 fev 2017
Accepted
03 apr 2017
First published
03 apr 2017

Mater. Horiz., 2017,4, 502-510

Ultrasensitive and stretchable resistive strain sensors designed for wearable electronics

X. Liao, Z. Zhang, Z. Kang, F. Gao, Q. Liao and Y. Zhang, Mater. Horiz., 2017, 4, 502 DOI: 10.1039/C7MH00071E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements