Issue 11, 2018

Amending anaerobic bioreactors with pyrogenic carbonaceous materials: the influence of material properties on methane generation

Abstract

Amending anaerobic digesters with pyrogenic carbonaceous materials (PCMs) has been suggested to improve methane (CH4) production by enabling electron conduction between fermenters and methanogens. This enhancement has been attributed to the electrical conductivity of some PCMs. Properties other than conductivity have received little attention, leaving uncertain the primary drivers of the observed improvements. Accordingly, the objective of this study was to relate the electrical conductivity, adsorptive behavior, pH effects, and surface properties of PCMs to CH4 production rates and CH4 recoveries in swine wastewater-fed, short-term anaerobic batch reactors. Three types of PCM particles [graphite, biochar, and activated carbon (AC)] in two size ranges and three particle loadings were tested and compared to non-conductive glass particles and no-particle controls. Graphite amendments resulted in higher CH4 production rates and CH4 recoveries than the no-particle controls and showed improvements with increased particle loadings. The impact of biochar and AC amendments depended on particle sizes and loadings, with granule amendments generally exceeding or matching the controls. Powdered biochar and AC amendments substantially decreased the performance. Material conductivity was a poor predictor of CH4 production rates, and bulk solution pH changes due to particle amendments could not explain reactor performance discrepancies. Adsorption was a critical material property controlling the fate of wastewater chemical oxygen demand (COD). Powdered biochar and AC, which adsorbed more COD than graphite and glass, resulted in lower COD to CH4 conversion. These results indicate that PCM properties other than conductivity, such as adsorption, can strongly impact short-term bioreactor performance. These properties should be taken into consideration when selecting and optimizing PCMs for biological-based technologies.

Graphical abstract: Amending anaerobic bioreactors with pyrogenic carbonaceous materials: the influence of material properties on methane generation

Supplementary files

Article information

Article type
Paper
Submitted
02 iyl 2018
Accepted
14 avq 2018
First published
15 avq 2018

Environ. Sci.: Water Res. Technol., 2018,4, 1794-1806

Amending anaerobic bioreactors with pyrogenic carbonaceous materials: the influence of material properties on methane generation

Q. Cheng, F. L. de los Reyes and D. F. Call, Environ. Sci.: Water Res. Technol., 2018, 4, 1794 DOI: 10.1039/C8EW00447A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements