Issue 45, 2019

Micromachined multigroove silicon ATR FT-IR internal reflection elements for chemical imaging of microfluidic devices

Abstract

The performance of low-cost, microgroove silicon (Si)-based internal reflection elements (μ-groove IREs) for infrared chemical imaging of microfluidic devices is described. A custom-designed, horizontal microscope coupled with an imaging focal plane array area detector is described. After characterizing the inherent distortions of the microscope under wide field illumination, a checkerboard pattern lithographically printed on the principal reflection surface was imaged to determine the spatial resolution of the experimental setup which was approximately 14 μm per pixel. The image contains different regions of varying quality. Geometric ray tracing indicates that the different components in the image are caused by multiple beam paths through the μ-groove IRE. Regions of high image quality can be selected to cover a field of view with lateral dimensions of several hundred micrometers. Proof of concept chemical imaging with μ-groove IREs is demonstrated through the successful mapping of isotope exchange between two co-laminar flows of water and heavy water in a single microfluidic channel. A prospective on how imaging quality with near diffraction limited spatial resolution could be achieved is also provided.

Graphical abstract: Micromachined multigroove silicon ATR FT-IR internal reflection elements for chemical imaging of microfluidic devices

Supplementary files

Article information

Article type
Paper
Submitted
30 avq 2019
Accepted
24 okt 2019
First published
24 okt 2019

Anal. Methods, 2019,11, 5776-5783

Micromachined multigroove silicon ATR FT-IR internal reflection elements for chemical imaging of microfluidic devices

T. A. Morhart, S. T. Read, G. Wells, M. Jacobs, S. M. Rosendahl, S. Achenbach and I. J. Burgess, Anal. Methods, 2019, 11, 5776 DOI: 10.1039/C9AY02248A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements