Issue 35, 2019

Surface anchored self-assembled reaction centre mimics as photoanodes consisting of a secondary electron donor, aluminium(iii) porphyrin and TiO2 semiconductor

Abstract

A series of vertically assembled photoanodes, consisting of 5,10,15,20-tetrakis(3,4,5-trifluorophenyl)aluminum(III) porphyrin (AlPorF3), a pyridine appended electron donor (PTZ-Py, PTZ = phenothiazine; TTF-Py, TTF = tetrathiafulvalene), and semiconductor TiO2, have been fabricated by exploiting the unique axial properties of AlPorF3. The new photoanodes were characterized by steady-state and transient spectroscopic techniques. Transient-absorption studies show that in the absence of a donor, both the photoanodes (AlPorF3–TiO2 and AlPorF3-Ph–TiO2) exhibit electron injection from AlPorF3 into the conduction band of TiO2 and the injection efficiencies are strongly dependent on the linker. Faster electron injection and recombination is revealed when AlPorF3 is directly bound to TiO2. Although a secondary electron donor is coordinated to AlPorF3 (viz., Donor-Py-AlPorF3–TiO2 and Donor-Py-AlPorF3-Ph–TiO2), the primary charge separation occurs in the form of electron injection from AlPorF3 to TiO2 followed by a secondary process involving photooxidation of the donor (PTZ and TTF) with AlPorF3˙+. The estimated electron injection lifetimes and the AlPorF3˙+ decay lifetimes strongly depend on the electron richness of the donor; the higher the electron density of the donor, the faster the electron injection and photooxidation witnessed. The photoanodes with TTF (TTF-Py-AlPorF3–TiO2 and TTF-Py-AlPorF3-Ph–TiO2) show faster injection and shorter decay lifetimes of AlPorF3˙+ over their PTZ counterparts (PTZ-Py-AlPorF3–TiO2 and PTZ-Py-AlPorF3-Ph–TiO2). The observed trends suggest that the strong secondary electron donor enhances the injection and the subsequent photooxidation processes in the investigated photoanodes. The successful mimicking of a sequential charge-separation process makes aluminum(III) porphyrins potential sensitizers for the construction of photoanodes, especially for photocatalytic and dye-sensitized solar cells for conversion and storage of solar energy.

Graphical abstract: Surface anchored self-assembled reaction centre mimics as photoanodes consisting of a secondary electron donor, aluminium(iii) porphyrin and TiO2 semiconductor

Supplementary files

Article information

Article type
Paper
Submitted
16 iyn 2019
Accepted
06 avq 2019
First published
07 avq 2019

Phys. Chem. Chem. Phys., 2019,21, 19612-19622

Author version available

Surface anchored self-assembled reaction centre mimics as photoanodes consisting of a secondary electron donor, aluminium(III) porphyrin and TiO2 semiconductor

N. Zarrabi, G. N. Lim, B. J. Bayard, F. D'Souza and P. K. Poddutoori, Phys. Chem. Chem. Phys., 2019, 21, 19612 DOI: 10.1039/C9CP03400E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements