Issue 44, 2021

Shape-controlled Cu2O nanospheres as bifunctional catalysts boosting the oxidations of glucose and hydrazine

Abstract

Cuprous oxide (Cu2O) nanoparticles hold promise as low-cost catalysts for the oxidations of both glucose and hydrazine (N2H4), and their different geometrical shapes have been implied in literature to influence their catalytic activities. In this study, for the first time, a shape-controlled growth of the Cu2O crystals was achieved by the morphological evolution from nanocubes to nanopolyhedrons and then nanospheres. Subsequently, their catalytic performances were evaluated for the oxidations of glucose and hydrazine. With different catalytic activities observed, Cu2O nanospheres exhibited the best performance out of the three studied morphological shapes. The results showed that the Cu2O nanosphere-assembled electrode achieved boosting catalytic activities towards the oxidation of glucose with a high sensitivity of 3210 μA cm−2 Mm−1, a linear detection range of 1–1000 μM, a detection limit of 0.0163 μM and good selectivity. Moreover, the Cu2O nanosphere-assembled electrode also showed a low onset potential of −0.1 V, a high energy density of 4.1 mA cm−2 and a good stability towards the N2H4 oxidation. The characterization results indicated that a higher growth rate along the (111) over the (200) facet in nanosphere Cu2O crystals was in favor of their catalytic activities.

Graphical abstract: Shape-controlled Cu2O nanospheres as bifunctional catalysts boosting the oxidations of glucose and hydrazine

Supplementary files

Article information

Article type
Paper
Submitted
13 iyl 2021
Accepted
31 avq 2021
First published
13 okt 2021

CrystEngComm, 2021,23, 7781-7786

Shape-controlled Cu2O nanospheres as bifunctional catalysts boosting the oxidations of glucose and hydrazine

L. Wang, Y. Wu, C. Sun, H. Wang and J. Ren, CrystEngComm, 2021, 23, 7781 DOI: 10.1039/D1CE00913C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements