Issue 7, 2021

Deterministic control of adhesive crack propagation through jamming based switchable adhesives

Abstract

Controlling delamination across a material interface is a foundation of adhesive science and technology. This ranges from creating permanent, strong adhesives which limit crack propagation to reversible adhesives which initiate cracks for release. Methods which dynamically control cracks can lead to more robust adhesion, however specific control of crack initiation, propagation, and arresting is challenging because time scales of crack propagation are much faster than times scales of mechanisms to arrest cracks. Here we show the deterministic control of crack initiation, propagation, and arresting by integrating a granular jamming layer into adhesive films. This allows for controlled initiation of a propagating crack by reducing rigidity and then rapidly arresting the crack through jamming, with a rise in stiffness and an 11× enhancement in adhesion. This process is highly reversible and programmable, allowing for numerous crack initiation, propagation, and arresting cycles at arbitrary selectable locations in a peeling adhesive. We demonstrate this crack-control approach in single and multiple peel directions under fixed load conditions in response to diverse pressurization input signal profiles (i.e. time varying propagation and arresting scenarios).

Graphical abstract: Deterministic control of adhesive crack propagation through jamming based switchable adhesives

Supplementary files

Article information

Article type
Paper
Submitted
30 noy 2020
Accepted
15 yan 2021
First published
18 yan 2021

Soft Matter, 2021,17, 1731-1737

Deterministic control of adhesive crack propagation through jamming based switchable adhesives

C. B. Haverkamp, D. Hwang, C. Lee and M. D. Bartlett, Soft Matter, 2021, 17, 1731 DOI: 10.1039/D0SM02129F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements