Issue 12, 2022

Defect-engineered room temperature negative differential resistance in monolayer MoS2 transistors

Abstract

The negative differential resistance (NDR) effect has been widely investigated for the development of various electronic devices. Apart from traditional semiconductor-based devices, two-dimensional (2D) transition metal dichalcogenide (TMD)-based field-effect transistors (FETs) have also recently exhibited NDR behavior in several of their heterostructures. However, to observe NDR in the form of monolayer MoS2, theoretical prediction has revealed that the material should be more profoundly affected by sulfur (S) vacancy defects. In this work, monolayer MoS2 FETs with a specific amount of S-vacancy defects are fabricated using three approaches, namely chemical treatment (KOH solution), physical treatment (electron beam bombardment), and as-grown MoS2. Based on systematic studies on the correlation of the S-vacancies with both the device's electron transport characteristics and spectroscopic analysis, the NDR has been clearly observed in the defect-engineered monolayer MoS2 FETs with an S-vacancy (VS) amount of ∼5 ± 0.5%. Consequently, stable NDR behavior can be observed at room temperature, and its peak-to-valley ratio can also be effectively modulated via the gate electric field and light intensity. Through these results, it is envisioned that more electronic applications based on defect-engineered layered TMDs will emerge in the near future.

Graphical abstract: Defect-engineered room temperature negative differential resistance in monolayer MoS2 transistors

Supplementary files

Article information

Article type
Communication
Submitted
23 avq 2022
Accepted
17 okt 2022
First published
18 okt 2022

Nanoscale Horiz., 2022,7, 1533-1539

Defect-engineered room temperature negative differential resistance in monolayer MoS2 transistors

W. Chang, C. Lu, T. H. Yang, S. Yang, K. B. Simbulan, C. Lin, S. Hsieh, J. Chen, K. Li, C. Chen, T. Hou, T. Lu and Y. Lan, Nanoscale Horiz., 2022, 7, 1533 DOI: 10.1039/D2NH00396A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements