Issue 30, 2024

Low dielectric polymers at high frequency with bulky adamantane groups as the linker

Abstract

Two monomers with adamantane units as the linker and benzocyclobutene (BCB) groups as the crosslinking units have been successfully synthesized, and they are thermally treated to form polymers with a 5% weight loss temperature of up to 478 °C and a glass transition temperature of more than 350 °C. Among the polymers, the one containing fluorobenzene units displays a dielectric constant (Dk) of 2.58 and a dielectric loss (Df) of 1.94 × 10−3 at a frequency of 10 GHz. Such a fluoro-containing polymer also exhibits a water uptake of 0.12% even when immersing it in boiling water for 72 h. These results demonstrate that the two polymers are suitable as low dielectric materials for application in the fabrication of devices used in high-frequency communication.

Graphical abstract: Low dielectric polymers at high frequency with bulky adamantane groups as the linker

Supplementary files

Article information

Article type
Paper
Submitted
04 fev 2024
Accepted
29 iyn 2024
First published
02 iyl 2024
This article is Open Access
Creative Commons BY-NC license

Polym. Chem., 2024,15, 3063-3070

Low dielectric polymers at high frequency with bulky adamantane groups as the linker

L. Zhao, J. Sun and Q. Fang, Polym. Chem., 2024, 15, 3063 DOI: 10.1039/D4PY00141A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements