Issue 40, 2015

Thermal stability of Mg2Si0.3Sn0.7 under different heat treatment conditions

Abstract

Sb-doped Mg2Si0.3Sn0.7 solid solutions were prepared by a two-step solid state reaction method followed by electron-discharge plasma activated sintering (Ed-PAS). Thermal stability was tested by changing heat treatment conditions, i.e., annealing temperature, annealing time, annealing atmosphere and preventive coatings. Mg loss is severe when the solid solutions are annealed in vacuum, due to the high saturated vapor pressure of Mg. As a consequence of Mg loss, the β Sn–Sb alloy formed. However, the solid solutions are oxidized when annealed in air. And this is effectively prevented when the samples are coated with boron nitride (BN) spray. The results showed that Mg2Si1−xSnx can be exposed for long periods of time to temperature up to about 823 K, provided it is protected with specific coatings. However, the structure becomes unstable when the temperature exceeds much beyond 823 K, mainly due to the peritectic reaction. The composition, microstructure and thermoelectric (TE) properties of the annealed samples were carefully explored and critically assessed.

Graphical abstract: Thermal stability of Mg2Si0.3Sn0.7 under different heat treatment conditions

Supplementary files

Article information

Article type
Paper
Submitted
20 may 2015
Accepted
23 iyn 2015
First published
23 iyn 2015

J. Mater. Chem. C, 2015,3, 10381-10387

Author version available

Thermal stability of Mg2Si0.3Sn0.7 under different heat treatment conditions

K. Yin, Q. Zhang, Y. Zheng, X. Su, X. Tang and C. Uher, J. Mater. Chem. C, 2015, 3, 10381 DOI: 10.1039/C5TC01434D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements