Correction: A three-dimensional metal grid mesh as a practical alternative to ITO
Abstract
Correction for ‘A three-dimensional metal grid mesh as a practical alternative to ITO’ by Sungwoo Jang et al., Nanoscale, 2016, 8, 14257–14263.
* Corresponding authors
a
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea
E-mail:
heetae@kaist.ac.kr
b Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea
c Department of Mechanical Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul, Republic of Korea
d KAIST Institute for the NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, Republic of Korea
Correction for ‘A three-dimensional metal grid mesh as a practical alternative to ITO’ by Sungwoo Jang et al., Nanoscale, 2016, 8, 14257–14263.
S. Jang, W. Jung, C. Kim, P. Won, S. Lee, K. M. Cho, M. L. Jin, C. J. An, H. Jeon, S. H. Ko, T. Kim and H. Jung, Nanoscale, 2018, 10, 17410 DOI: 10.1039/C8NR90191K
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content