Issue 3, 2022

Reply to the ‘Comment on “Ultralow magnetostrictive flexible ferromagnetic nanowires”’ by D. Faurie, N. Challab, M. Haboussi, and F. Zighem, Nanoscale, 2022, 14, DOI: 10.1039/D1NR01773J

Abstract

In the comment to our paper, D. Faurie et al. have carried out simulations on Co-nanowires subjected to tensile stress perpendicular to the length of the nanowires. According to their simulation, the low effective magnetostriction constant of the Co nanowires results from a very low transfer of stress. They suggest that a higher transfer of stress would be obtained if the wires are bent along the length of the nanowires. Here we compare the result of magneto-optical experiments conducted by bending the nanowires both along and perpendicular to their long axis. The obtained effective magnetostriction of the Co-nanowires is, within the experimental resolution, independent of the bending direction.

Graphical abstract: Reply to the ‘Comment on “Ultralow magnetostrictive flexible ferromagnetic nanowires”’ by D. Faurie, N. Challab, M. Haboussi, and F. Zighem, Nanoscale, 2022, 14, DOI: 10.1039/D1NR01773J

Associated articles

Article information

Article type
Comment
Submitted
07 Sep 2021
Accepted
30 Nov 2021
First published
11 Jan 2022
This article is Open Access
Creative Commons BY-NC license

Nanoscale, 2022,14, 1017-1018

Reply to the ‘Comment on “Ultralow magnetostrictive flexible ferromagnetic nanowires”’ by D. Faurie, N. Challab, M. Haboussi, and F. Zighem, Nanoscale, 2022, 14, DOI: 10.1039/D1NR01773J

G. Muscas, P. E. Jönsson and M. V. Kamalakar, Nanoscale, 2022, 14, 1017 DOI: 10.1039/D1NR05893B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements