Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion

Karl Peter Davidson; Ruiliang Liu; Chenyang Zhu; Mehmet Cagirici; Li Ping Tan; Alpravinosh Alagesan; Sarat Singamneni

doi:10.1039/D4MA90134G

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion

Karl Peter Davidson,

*^a Ruiliang Liu,^b Chenyang Zhu,^c Mehmet Cagirici,

^d Li Ping Tan,

^a Alpravinosh Alagesan^c and Sarat Singamneni^e

Author affiliations

* Corresponding authors

^a School of Materials Science and Engineering, Nanyang Technological University, Singapore, Singapore

^b Curtin Corrosion Centre, Western Australia School of Mines, Faculty of Science and Engineering, Curtin University, Perth, WA 6102, Australia

^c School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore

^d Singapore Centre for 3D Printing, Nanyang Technological University, Singapore, Singapore

^e Additive Manufacturing Research Centre, Auckland University of Technology, Auckland, New Zealand

Abstract

Correction for ‘Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion’ by Karl Peter Davidson et al., Mater. Adv., 2024, 5, 8177–8198, https://doi.org/10.1039/D4MA00448E.

Download options Please wait...

Associated articles

Effect of build orientation and heat treatment on the microstructure, mechanical…

Article information

DOI: https://doi.org/10.1039/D4MA90134G
Article type: Correction
Submitted: 24 Oct 2024
Accepted: 24 Oct 2024
First published: 07 Nov 2024
This article is Open Access

Download Citation

Mater. Adv., 2024,5, 9500-9500

Permissions

Request permissions

Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion

K. P. Davidson, R. Liu, C. Zhu, M. Cagirici, L. P. Tan, A. Alagesan and S. Singamneni, Mater. Adv., 2024, 5, 9500 DOI: 10.1039/D4MA90134G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Materials Advances

Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion

Abstract

Associated articles

Article information

Download Citation

Permissions

Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion

Social activity

Search articles by author

Spotlight

Advertisements