Issue 7, 2008

Lateral-driven continuous dielectrophoretic microseparators for blood cells suspended in a highly conductive medium

Abstract

This paper presents lateral-driven continuous dielectrophoretic (DEP) microseparators for separating red and white blood cells suspended in highly conductive dilute whole blood. The continuous microseparators enable the separation of blood cells based on the lateral DEP force generated by a planar interdigitated electrode array placed at an angle to the direction of flow. The simplified line charge model that we developed for the theoretical analysis was verified by comparing it with simulated and measured results. Experimental results showed that the divergent type of microseparator can continuously separate out 87.0% of the red blood cells (RBCs) and 92.1% of the white blood cells (WBCs) from dilute whole blood within 5 min simply by using a 2 MHz, 3 Vp-p AC voltage to create a gradient electric field in a medium that conducts at 17 mS cm−1. Under the same conditions, the convergent type of microseparator could separate out 93.6% of the RBCs and 76.9% of the WBCs. We have shown that our lateral-driven continuous DEP microseparator design is practical for the continuous separation of blood cells without the need to control the conductivity of the suspension medium, overcoming critical drawbacks of DEP microseparators.

Graphical abstract: Lateral-driven continuous dielectrophoretic microseparators for blood cells suspended in a highly conductive medium

Supplementary files

Article information

Article type
Paper
Submitted
11 Feb 2008
Accepted
08 Apr 2008
First published
07 May 2008

Lab Chip, 2008,8, 1079-1086

Lateral-driven continuous dielectrophoretic microseparators for blood cells suspended in a highly conductive medium

K. Han and A. B. Frazier, Lab Chip, 2008, 8, 1079 DOI: 10.1039/B802321B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements