Issue 26, 2009

Improvements of photocurrent by using modified SiO2 in the poly(ether urethane)/poly(ethylene oxide) polymer electrolyte for all-solid-state dye-sensitized solar cells

Abstract

Nanocomposite polymer electrolytes containing poly(ether urethane) (PEUR)/poly(ethylene oxide) (PEO)/modified SiO2 were prepared for all-solid-state dye-sensitized solar cells with a high efficiency of 4.86% and an active area of 0.25 cm2 under AM1.5 conditions at 100 mW cm−2 irradiation.

Graphical abstract: Improvements of photocurrent by using modified SiO2 in the poly(ether urethane)/poly(ethylene oxide) polymer electrolyte for all-solid-state dye-sensitized solar cells

Supplementary files

Article information

Article type
Communication
Submitted
24 Feb 2009
Accepted
01 May 2009
First published
26 May 2009

Chem. Commun., 2009, 3895-3897

Improvements of photocurrent by using modified SiO2 in the poly(ether urethane)/poly(ethylene oxide) polymer electrolyte for all-solid-state dye-sensitized solar cells

Y. Zhou, W. Xiang, S. Chen, S. Fang, X. Zhou, J. Zhang and Y. Lin, Chem. Commun., 2009, 3895 DOI: 10.1039/B903877A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements