Issue 11, 2009

Synthesis and characterization of well-aligned anatase TiO2nanocrystals on fused silicavia metal–organic vapor deposition

Abstract

Well-aligned anatase (A)–TiO2nanocrystals (NCs) were grown by cold-wall metalorganic chemical vapor deposition (MOCVD) on fused silica using titanium-tetraisopropoxide (Ti(OC3H7)4) as the source reagent. Field emission scanning electron microscopy (FESEM) micrographs showed the growth of vertically aligned NCs. X-ray diffractometry (XRD) pattern revealed the aligned A–TiO2 with a preferential orientation of (220). Raman spectrum confirmed the deposition of pure anatase phase TiO2 on fused silica. Luminescence of self-trapped excitons and oxygen vacancies were observed in anatase NCs. The indirect band gap of A–TiO2 was determined to be 3.14 ± 0.01 eV by analyzing the surface photovoltage spectrum. Energy-dispersive X-ray spectroscopy (EDS) and X ray photoelectron spectroscopy (XPS) analyses showed oxygenvs.titanium ratio of 2.0 ± 0.1 for the as-deposited TiO2 NCs. Further structural characterization of the well-aligned A–TiO2 NCs was studied using transmission electron microscopy (TEM) technique. The formation of building units bonded along {112} facets with preferred (220) orientation of the well-aligned A–TiO2 NCs on fused silica were presented and the probable growth mechanisms were discussed.

Graphical abstract: Synthesis and characterization of well-aligned anatase TiO2nanocrystals on fused silicavia metal–organic vapor deposition

Article information

Article type
Paper
Submitted
12 May 2009
Accepted
22 Jun 2009
First published
13 Jul 2009

CrystEngComm, 2009,11, 2313-2318

Synthesis and characterization of well-aligned anatase TiO2nanocrystals on fused silicavia metal–organic vapor deposition

C. Chen, Y. Chen, Y. Huang, D. Tsai, K. Tiong and P. Liao, CrystEngComm, 2009, 11, 2313 DOI: 10.1039/B909433D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements