Fabrication of novel comb-like Cu2O nanorod-based structures through an interface etching method and their application as ethanol sensors

Lina Guan; Huan Pang; Jianjun Wang; Qingyi Lu; Jingzhou Yin; Feng Gao

doi:10.1039/C0CC02331K

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Fabrication of novel comb-like Cu₂Onanorod-based structures through an interface etching method and their application as ethanol sensors†

Lina Guan,^a Huan Pang,^a Jianjun Wang,^b Qingyi Lu,*^a Jingzhou Yin^ac and Feng Gao*^b

Author affiliations

* Corresponding authors

^a State Key Laboratory of Coordination Chemistry, Coordination Chemistry Institute, Nanjing National Laboratory of Microstructures, Nanjing University, Nanjing 210093, P. R. China
E-mail: qylu@nju.edu.cn

^b Department of Materials Science and Engineering, Nanjing University, Nanjing 210093, P. R. China
E-mail: fgao@nju.edu.cn

^c School of Chemistry and Chemical Engineering, Huaiyin Normal University, Huai’an 223300, P. R. China

Abstract

Novel comb-like cuprous oxide nanorod-based structures were synthesized through an interface etching method with salicylaldehyde as ligand and reducing agent in a water–toluene system and were demonstrated to have great application potentials as ethanol sensors.

Download options Please wait...

Supplementary files

Experimental details, XRD patterns, SEM images and IR spectra PDF (1234K)

Article information

DOI: https://doi.org/10.1039/C0CC02331K
Article type: Communication
Submitted: 02 Jul 2010
Accepted: 06 Aug 2010
First published: 24 Aug 2010

Download Citation

Chem. Commun., 2010,46, 7022-7024

Permissions

Request permissions

Fabrication of novel comb-like Cu₂O nanorod-based structures through an interface etching method and their application as ethanol sensors

L. Guan, H. Pang, J. Wang, Q. Lu, J. Yin and F. Gao, Chem. Commun., 2010, 46, 7022 DOI: 10.1039/C0CC02331K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Chemical Communications