Issue 21, 2011

Dielectrophoretic trapping of DNA-coated gold nanoparticles on silicon based vertical nanogap devices

Abstract

We report on the successful dielectrophoretic trapping and electrical characterization of DNA-coated gold nanoparticles on vertical nanogap devices (VNDs). The nanogap devices with an electrode distance of 13 nm were fabricated from Silicon-on-Insulator (SOI) material using a combination of anisotropic reactive ion etching (RIE), selective wet chemical etching and metal thin-film deposition. Au nanoparticles (diameter 40 nm) coated with a monolayer of dithiolated 8 base pairs double stranded DNA were dielectrophoretically trapped into the nanogap from electrolyte buffer solution at MHz frequencies as verified by scanning and transmission electron microscopy (SEM/TEM) analysis. First electrical transport measurements through the formed DNA–Au–DNA junctions partially revealed an approximately linear current–voltage characteristic with resistance in the range of 2–4 GΩ when measured in solution. Our findings point to the importance of strong covalent bonding to the electrodes in order to observe DNA conductance, both in solution and in the dry state. We propose our setup for novel applications in biosensing, addressing the direct interaction of biomolecular species with DNA in aqueous electrolyte media.

Graphical abstract: Dielectrophoretic trapping of DNA-coated gold nanoparticles on silicon based vertical nanogap devices

Article information

Article type
Communication
Submitted
30 Nov 2010
Accepted
22 Feb 2011
First published
08 Mar 2011

Phys. Chem. Chem. Phys., 2011,13, 9973-9977

Dielectrophoretic trapping of DNA-coated gold nanoparticles on silicon based vertical nanogap devices

S. Strobel, R. A. Sperling, B. Fenk, W. J. Parak and M. Tornow, Phys. Chem. Chem. Phys., 2011, 13, 9973 DOI: 10.1039/C0CP02718A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements