Issue 9, 2011

Flexible dye sensitized solar cells using TiO2 nanotubes

Abstract

The growth of TiO2 nanotube arrays on plastic flexible substrates is researched. The approach uses anodization of a titanium thick film for obtaining nanotubes directly on poly(ethylene terephthalate) (PET) and Kapton HN substrate. The morphological features of the tubes can be finely tuned by varying the preparation conditions, and tube morphology affects the functional properties of the nanotube array. Crystallization of the anatase phase in nanotubes on Kapton HN substrate is obtained via post growth annealing. The nanotube arrays have been dye-sensitized using the commercial Ru-based N719 dye. The system was tested as photoanode in a flexible dye sensitized solar cell. Photoconversion efficiency of 3.5% was obtained.

Graphical abstract: Flexible dye sensitized solar cells using TiO2 nanotubes

Article information

Article type
Paper
Submitted
27 Sep 2010
Accepted
12 Mar 2011
First published
29 Jun 2011

Energy Environ. Sci., 2011,4, 3408-3413

Flexible dye sensitized solar cells using TiO2 nanotubes

A. Vomiero, V. Galstyan, A. Braga, I. Concina, M. Brisotto, E. Bontempi and G. Sberveglieri, Energy Environ. Sci., 2011, 4, 3408 DOI: 10.1039/C0EE00485E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements