Issue 10, 2011

Ultralong single crystalline V2O5nanowire/graphene composite fabricated by a facile green approach and its lithium storage behavior

Abstract

A novel hybrid material constructed from 2D graphene nanosheets (GNS) and 1D vanadium pentoxide (V2O5) nanowires was successfully fabricated via a very simple green approach. The ultralong V2O5 single crystalline nanowires were supported on the transparent GNS substrate and exhibited excellent electrochemical properties. When used as a cathode material of lithium-ion batteries, the composite material revealed high initial discharge capacities and exceptional rate capacities. For instance, at the lower current density of 50 mA g−1, an initial specific discharge capacity of 412 mAh g−1 could be achieved; when the current density was increased to 1600 mA g−1, the composite still delivered 316 mAh g−1lithium ions. The good performance of the composite resulted from its unique nano-scaled V2O5 wires with short diffusion pathway for lithium ions and the excellent electrical conductivity of GNS. Note that the fabrication approach in the present work is environmental friendly without any strong reduction and oxidation reagents, or causing the generation of toxic gas during the fabrication process. We believe that this green approach may open up the possibility of fabricating more novel structured graphene-based functional materials.

Graphical abstract: Ultralong single crystalline V2O5 nanowire/graphene composite fabricated by a facile green approach and its lithium storage behavior

Supplementary files

Article information

Article type
Paper
Submitted
25 Mar 2011
Accepted
10 Jun 2011
First published
08 Aug 2011

Energy Environ. Sci., 2011,4, 4000-4008

Ultralong single crystalline V2O5 nanowire/graphene composite fabricated by a facile green approach and its lithium storage behavior

H. Liu and W. Yang, Energy Environ. Sci., 2011, 4, 4000 DOI: 10.1039/C1EE01353J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements