Issue 11, 2011

Poly(vinylidene fluoride)-graft-poly(2-hydroxyethyl methacrylate): a novel material for high energy density capacitors

Abstract

We report the graft copolymerization synthesis of novel high dielectric constant HEMA (2-hydroxyethylmethacrylate)-graft-poly(vinylidene fluoride) (PVDF) copolymers for potential applications in high energy density capacitors. In the present study the graft copolymerization reaction was introduced by irradiation (electron beam) treatment of the PVDF polymer powder. The chemical changes in the PVDF polymers after HEMA grafting were monitored and the results were evaluated by FTIR, DSC, TGA and contact angle measurement. An analysis is presented on the effectiveness of this approach as a function of electron beam operating variables including radiation dose, reaction time, reaction temperature, monomer concentration and effect of solvent. The PHEMA-g-PVDF copolymers demonstrate improved dielectric properties such as high dielectric constant, lower leakage and low dielectric loss as compared to pristine PVDF. Correlation of dielectric properties with the graft copolymerization reaction mechanism was discussed.

Graphical abstract: Poly(vinylidene fluoride)-graft-poly(2-hydroxyethyl methacrylate): a novel material for high energy density capacitors

Article information

Article type
Paper
Submitted
26 Jul 2010
Accepted
20 Dec 2010
First published
31 Jan 2011

J. Mater. Chem., 2011,21, 3751-3759

Poly(vinylidene fluoride)-graft-poly(2-hydroxyethyl methacrylate): a novel material for high energy density capacitors

V. K. Thakur, E. J. Tan, M. Lin and P. S. Lee, J. Mater. Chem., 2011, 21, 3751 DOI: 10.1039/C0JM02408B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements