Issue 13, 2012

A highly sensitive sensor for Cu2+ with unmodified gold nanoparticles and DNAzyme by using the dynamic light scattering technique

Abstract

Copper ion (Cu2+) plays an important role in many biological reactions, and a suitable level of Cu2+ is necessary for the regular metabolism of life. Thus developing a sensitive and simple method for determination of Cu2+ is essential. Here, a novel and sensitive Cu2+ sensor was developed based on detecting the average hydrodynamic diameter of AuNPs by using dynamic light scattering (DLS). Cu2+-specific DNAzyme was double-strand and could not adsorb on the surface of AuNPs, accordingly AuNPs aggregation would occur with the addition of NaCl. However, Cu2+ could cleave DNAzyme and release single-stranded DNA (ssDNA) fragments, which could adsorb on the surface of AuNPs and prevent them from aggregation. Such differences in DNA adsorption ability on AuNPs before and after the addition of Cu2+ affected the disperse state of AuNPs directly, and then affected their average hydrodynamic diameter, which could be detected with the DLS technique. Based upon the above mentioned principle, detection of Cu2+ could be realized over the range from 100 pM to 2.0 nM, with a linear regression equation of D = 306.73 − 89.66C (C: nM, R = 0.9953) and a detection limit of 60 pM (3δ/slope). Moreover, satisfactory results were obtained when the assay was applied in the detection of Cu2+ in water samples.

Graphical abstract: A highly sensitive sensor for Cu2+ with unmodified gold nanoparticles and DNAzyme by using the dynamic light scattering technique

Article information

Article type
Paper
Submitted
16 Feb 2012
Accepted
11 Apr 2012
First published
13 Apr 2012

Analyst, 2012,137, 3064-3069

A highly sensitive sensor for Cu2+ with unmodified gold nanoparticles and DNAzyme by using the dynamic light scattering technique

X. Miao, L. Ling, D. Cheng and X. Shuai, Analyst, 2012, 137, 3064 DOI: 10.1039/C2AN35217F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements