Why can a nanometer-thick polymer coated surface be more wettable to water than to oil?†
Abstract
Although surfaces more wettable to
* Corresponding authors
a
Department of Chemical and Petroleum Engineering, University of Pittsburgh, 3700 O'Hara Street, Pittsburgh, PA 15261, USA
E-mail:
lel55@pitt.edu
b J.A. Woollam Co., Inc., 645 M Street, Suite 102, Lincoln, NE 68508, USA
Although surfaces more wettable to
L. Li, Y. Wang, C. Gallaschun, T. Risch and J. Sun, J. Mater. Chem., 2012, 22, 16719 DOI: 10.1039/C2JM32580B
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content