Issue 40, 2012

Unique Pd/graphene nanocomposites constructed using supercritical fluid for superior electrochemical sensing performance

Abstract

Supercritical CO2 fluid (scCO2) with gas-like diffusivity, low viscosity, and near-zero surface tension can help debundle graphene nanosheets and uniformly disperse Pd nanocrystals (approximately 3 nm) between them. The in situ synthesis protocol of Pd (from scCO2), which does not require pretreatment of the support, preserves the peculiar characteristics of graphene, such as the excellent electrical conductivity. The deposited Pd nanoparticles (NPs) can act as spacers to prevent restacking of the graphene nanosheets. Since the Pd catalyst particles are sandwiched between the highly conductive sheets, a superior electrochemical utilization can be achieved. The obtained Pd/graphene nanocomposite exhibited superior sensing performance (in terms of response current and potential resolution) toward ascorbic acid, dopamine, and uric acid, compared to that of Pd/graphene prepared using a conventional process. Promising detection sensitivity and selectivity of various scCO2-synthesized NPs/graphene heterostructures for various biological analytes can be expected.

Graphical abstract: Unique Pd/graphene nanocomposites constructed using supercritical fluid for superior electrochemical sensing performance

Supplementary files

Article information

Article type
Paper
Submitted
07 Jun 2012
Accepted
24 Aug 2012
First published
28 Aug 2012

J. Mater. Chem., 2012,22, 21466-21471

Unique Pd/graphene nanocomposites constructed using supercritical fluid for superior electrochemical sensing performance

C. Wu, C. Wang, M. Lee and J. Chang, J. Mater. Chem., 2012, 22, 21466 DOI: 10.1039/C2JM33671E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements