Issue 10, 2013

On-plate glycoproteins/glycopeptides selective enrichment and purification based on surface pattern for direct MALDI MS analysis

Abstract

In this paper, a novel method has been proposed to achieve selective enrichment and purification of glycoproteins/glycopeptides on a surface patterned sample support, which consists of a hydrophobic outer layer (F-SAM) and an internal boronic acid-modified gold microspot (900 μm). Upon deposition, the sample solution is firstly concentrated in a small area by repulsion of the hydrophobic outer layer, and then the glycoproteins/glycopeptides are selectively captured through boronic acid covalently binding in the inner layer. However, the non-glycosylated proteins/peptides or high concentration salts are removed after rinsing with alkaline solution. As a result, the detection sensitivity is improved by an order of magnitude greater than when using a stainless steel MALDI plate. With surface patterned sample support, the glycoproteins/glycopeptides can be detected even under interference from the excessive existing non-glycosylated proteins/peptides (10 times more than glycoproteins/glycopeptides). Simultaneously, high-quality mass spectra can be obtained even in the presence of urea (1 M), NaCl (1 M), or NH4HCO3 (200 mM). Therefore, this novel technique may be applied to high-throughput analysis of low-abundance glycoproteins/glycopeptides in complicated proteome research.

Graphical abstract: On-plate glycoproteins/glycopeptides selective enrichment and purification based on surface pattern for direct MALDI MS analysis

Supplementary files

Article information

Article type
Paper
Submitted
14 Jan 2013
Accepted
12 Mar 2013
First published
13 Mar 2013

Analyst, 2013,138, 3032-3037

On-plate glycoproteins/glycopeptides selective enrichment and purification based on surface pattern for direct MALDI MS analysis

Z. Zeng, Y. Wang, X. Guo, L. Wang and N. Lu, Analyst, 2013, 138, 3032 DOI: 10.1039/C3AN00107E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements