Issue 17, 2013

Rapid microwave synthesis of high aspect-ratio ZnO nanotetrapods for swift bisphenol A detection

Abstract

Highly crystalline and high aspect-ratio ZnO nanotetrapods were grown by a novel and swift microwave synthesis. FESEM analysis revealed that each tetrapod has four thin arms and are derived from the midst of the crystal. The diameter of each arm is larger at the base and smaller at the tip. Structural analysis revealed that these nanotetrapods are single crystalline and have a wurtzite hexagonal crystal structure. These ZnO nanotetrapods were used for the detection of BPA. The electrochemical sensor based on the ZnO nanotetrapods modified electrode showed electrocatalytic activity in terms of significant improvement of the anodic current of BPA and lowering of the detection limit. Under optimized conditions, the squarewave oxidation peak current of BPA was linear over the concentration range of 12.4 nM to 1.2 μM with the detection limit of 1.7 nM and sensitivity of 5.0 μA nM−1 cm−2. This sensor showed high sensitivity and response compared with other electrochemical sensors reported for the detection of BPA.

Graphical abstract: Rapid microwave synthesis of high aspect-ratio ZnO nanotetrapods for swift bisphenol A detection

Supplementary files

Article information

Article type
Communication
Submitted
17 Feb 2013
Accepted
27 May 2013
First published
29 May 2013

Analyst, 2013,138, 4764-4768

Rapid microwave synthesis of high aspect-ratio ZnO nanotetrapods for swift bisphenol A detection

A. Qurashi, J. A. Rather, K. De Wael, B. Merzougui, N. Tabet and M. Faiz, Analyst, 2013, 138, 4764 DOI: 10.1039/C3AN00336A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements