Issue 10, 2013

Characterising the morphological properties and surface composition of radium contaminated particles: a means of interpreting origin and deposition

Abstract

Radioactive ‘hot particles’ that occur in the environment present specific challenges for health and environmental regulators as often their small size makes them difficult to detect, and they are easily dispersed and accidentally ingested or inhaled by members of the public. This study of nine hot particles recovered from the beach at Dalgety Bay, UK, uses a combination of gamma spectrometry, imaging microscopy and SEM-EDX in order to characterise their morphology and surface composition, thereby helping to identify their origin and source characteristics. The nine particles analysed showed great heterogeneity in their activities, physical form and elemental composition. The particle activities were dominated by 226Ra and its daughters. Three distinct grouping of particles were identified based on their morphology (artefact, glassy and ‘metal-rich’), whilst four distinct groupings (artefact, glassy, angular and porphyric, rounded and highly porous) were identified based on morphology and surface properties as seen in the SEM. Whilst the ‘artefact’ particles were little altered, the other particles showed evidence of incineration. All particles were in a size and/or shape class vulnerable to wind- or water-mediated transport. No correlations were found between morphology and chemical composition. SEM-EDX analysis revealed C, Si, Zn, Fe, Ca are common in the particles together with Ba, Ni, Pb, Cu, Mn and Ti. This is interpreted as the particles being derived from radium containing luminescent paint containing a Zn/S phosphor, a hydrocarbon base and other fillers and additives. Evidence of copper and steel alloys were also present in some particles, whilst one consisted of a hydrocarbon based ‘capsule’. The combination of techniques employed here has enabled interpretation of the origins of the radioactive particles and given insights into the potential movement of particles within the local environment.

Graphical abstract: Characterising the morphological properties and surface composition of radium contaminated particles: a means of interpreting origin and deposition

Article information

Article type
Paper
Submitted
15 Mar 2013
Accepted
29 Aug 2013
First published
30 Aug 2013

Environ. Sci.: Processes Impacts, 2013,15, 1921-1929

Characterising the morphological properties and surface composition of radium contaminated particles: a means of interpreting origin and deposition

C. A. Wilson, W. P. Adderley, A. N. Tyler and P. Dale, Environ. Sci.: Processes Impacts, 2013, 15, 1921 DOI: 10.1039/C3EM00141E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements