Issue 3, 2013

A contribution to common Carius tube distillation techniques

Abstract

In this paper, we introduce an economic electrothermal timing steamer for common Carius tube Os in situ distillation. It is suitable for analysing several batches of samples. Its configuration allows the Carius tubes to be properly fixed and bathed in steam into which the tubes are immersed. The top of each Carius tube is sealed with a stretchy rubber head through which a pair of teflon tubes pierce, serving as inlet and outlet for clean air and OsO4 respectively. At steam temperatures of 99–100 °C, OsO4 in the sample solutions inside the Carius tubes is evaporated out and subsequently carried by clean air to the trapping water in an ampoule bottle, immersed in a box filled with ice. In the present study the steamer allowed for the convenient, efficient and simultaneous distillation of Os from seven samples with near ninety percent recovery. The blank values were 0.42 ± 0.15 pg and 0.26 ± 0.05 for 187Os and 187Os/188Os (n = 4). The dating results of reference materials (RMs) namely Henderson, HLP and JDC were in accordance with reference and certified values within the range of uncertainties. The special steamer has successfully been used in the analysis of pyrite samples for the distillation of Os.

Graphical abstract: A contribution to common Carius tube distillation techniques

Article information

Article type
Technical Note
Submitted
16 Dec 2011
Accepted
02 Jan 2013
First published
03 Jan 2013

J. Anal. At. Spectrom., 2013,28, 396-404

A contribution to common Carius tube distillation techniques

X. Jin, W. Li, P. Xiang, P. A. Sakyi, M. Zhu and L. Zhang, J. Anal. At. Spectrom., 2013, 28, 396 DOI: 10.1039/C2JA10374E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements