Issue 10, 2013

Improved performance of dye-sensitized solar cells with TiO2nanocrystal/nanowires double-layered films as photoelectrode

Abstract

A double-layered (DL) photoanode is fabricated based on TiO2 nanowire (NW) arrays coated by TiO2 nanocrystal (NC) films on their top. The highest efficiency of the obtained double-layered photoanode cells is ∼4.67% with 8 μm-long NW arrays and 6 μm-thick NC films. This efficiency is much higher than that of the devices with the pure TiO2 NC films or the pure TiO2 NW arrays as electrodes due to the synergistic effect of the dye adsorption and the rapid electron transport of NWs/NC structure.

Graphical abstract: Improved performance of dye-sensitized solar cells with TiO2 nanocrystal/nanowires double-layered films as photoelectrode

Article information

Article type
Paper
Submitted
23 Oct 2012
Accepted
21 Dec 2012
First published
04 Jan 2013

RSC Adv., 2013,3, 3304-3308

Improved performance of dye-sensitized solar cells with TiO2 nanocrystal/nanowires double-layered films as photoelectrode

X. Meng, Y. Wang, M. Wang, J. Tu and F. Wu, RSC Adv., 2013, 3, 3304 DOI: 10.1039/C2RA23430K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements