Issue 35, 2013

DDA simulations of noble metal and alloy nanocubes for tunable optical properties in biological imaging and sensing

Abstract

The selection of nanoparticles for achieving efficient contrast in biological imaging and sensing is based on their optical properties. In the present study, discrete dipole approximation (DDA) simulated Ag, Au and their alloy nanocubes of various edge length spectra are used to investigate the surface plasmon resonance (SPR) wavelength, resonant line-width, relative contribution of scattering in extinction, and sensitivity of the SPR peak position to the refractive index of the embedding medium. The optical properties are significantly altered by the nanocube alloy composition. The scattering to absorption ratio is enhanced and tuned in the visible regime by alloying the metals, which may be useful for biological imaging. The sensitivity of the SPR peak position to the bulk refractive index is enhanced in alloys compared to pure metals. According to the sensing figure of merit (FOM), there exists an optimum alloy nanocube edge length and spectral region to obtain the best sensing performance. Such endeavours have the potential to improve the sensing performance of the nanoparticles with tunable SPR wavelength of the desired spectral regime.

Graphical abstract: DDA simulations of noble metal and alloy nanocubes for tunable optical properties in biological imaging and sensing

Supplementary files

Article information

Article type
Paper
Submitted
08 Apr 2013
Accepted
08 Jul 2013
First published
09 Jul 2013

RSC Adv., 2013,3, 15427-15434

DDA simulations of noble metal and alloy nanocubes for tunable optical properties in biological imaging and sensing

J. S. Sekhon, H. K. Malik and S. S. Verma, RSC Adv., 2013, 3, 15427 DOI: 10.1039/C3RA41684D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements