Issue 30, 2013
From the journal:

RSC Advances

Exploration of the novel stacked structure and one-step fabrication of electrospun silica microbelts with controllable wettability

Yongtao Yao,a   Jungang Cao,b   Min Yang,c   Jianjun Li,*a   Shuyuan Zhao,a   Weilong Yin,a   Yibin Li,a   Xiaodong Hea  and  Jinsong Lenga  

* Corresponding authors

a National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, P. R. China
E-mail: ljj8081@gmail.com
Fax: 86-451-86403786
Tel: 86-451-86403786

b College of Chemistry, Jilin University, Changchun 130012, P. R. China

c School of Chemical Engineering & Technology, Harbin Institute of Technology, Harbin 150080, P. R. China

Abstract

A fairly general and direct synthesis for the preparation of silica microbelts with a novel stacked structure and controllable wetting behavior by using a combination of sol–gel chemistry and electrospinning techniques was explored successfully. The formation mechanism of the stacked structure and the potential application of the silica microbelts were confirmed.

Graphical abstract: Exploration of the novel stacked structure and one-step fabrication of electrospun silica microbelts with controllable wettability

About
Cited by
Related
Download options Please wait...

Article information

DOI
https://doi.org/10.1039/C3RA42356E
Article type
Communication
Submitted
14 May 2013
Accepted
29 May 2013
First published
29 May 2013

RSC Adv., 2013,3, 12026-12030

Permissions

Request permissions

Exploration of the novel stacked structure and one-step fabrication of electrospun silica microbelts with controllable wettability

Y. Yao, J. Cao, M. Yang, J. Li, S. Zhao, W. Yin, Y. Li, X. He and J. Leng, RSC Adv., 2013, 3, 12026 DOI: 10.1039/C3RA42356E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements