Issue 48, 2013

Structural evolution of colloidal gels at intermediate volume fraction under start-up of shear flow

Abstract

The microstructural evolution of the colloidal gel at intermediate volume fraction (15%) under start-up of shear flow has been studied by using the Brownian dynamics simulation method. The structural change was analyzed from three points of view, on cluster length scale, on local length scale and on anisotropy. Correlating the stress change which showed stress overshoot with the structural change on the cluster length scale, a mismatch between the initiation of the structural rupture and the stress maximum was observed. The mismatch was explained through the competition between the structural rupture and the stress bearing network structure. On the local length scale, topology change of the colloidal gel was investigated. As the rupture of the colloidal gel progressed, the multiply connected rigid chains with high bond number changed into singly connected soft chains with low bond number. During the structural evolution, the distinctive structural anisotropy was observed. Associating the structural anisotropy change with direction-dependent cluster behavior, the rupture mechanism of the colloidal gel could be suggested in the sequence of deformation, break up of the percolated network structure, rotation and break up of clusters, and the equilibrium of the three representative motions of small flocs (break up, rotation, and interlocking).

Graphical abstract: Structural evolution of colloidal gels at intermediate volume fraction under start-up of shear flow

Article information

Article type
Paper
Submitted
02 Aug 2013
Accepted
16 Oct 2013
First published
17 Oct 2013

Soft Matter, 2013,9, 11650-11662

Structural evolution of colloidal gels at intermediate volume fraction under start-up of shear flow

J. D. Park and K. H. Ahn, Soft Matter, 2013, 9, 11650 DOI: 10.1039/C3SM52090K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements