Issue 9, 2014

Silica and zirconia supported tungsten, molybdenum and gallium oxide catalysts for the synthesis of furfural

Abstract

SiO2 and ZrO2 supported W, Mo and Ga oxide catalysts were prepared by a sol–gel and wet-impregnation method. The 10 wt% WO3/SiO2 (sol–gel) catalyst showed 61 ± 2% furfural yield from hemicellulose in a one-pot fashion for at least 8 cycles. Based on XRD, TPD and Hammett acidity characterizations, the catalyst structure–activity correlation was drawn.

Graphical abstract: Silica and zirconia supported tungsten, molybdenum and gallium oxide catalysts for the synthesis of furfural

Supplementary files

Article information

Article type
Communication
Submitted
24 Apr 2014
Accepted
14 Jun 2014
First published
16 Jun 2014

Catal. Sci. Technol., 2014,4, 2904-2907

Silica and zirconia supported tungsten, molybdenum and gallium oxide catalysts for the synthesis of furfural

P. Bhaumik, T. Kane and P. L. Dhepe, Catal. Sci. Technol., 2014, 4, 2904 DOI: 10.1039/C4CY00530A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements