Issue 12, 2014

GFAAS determination of gold with ionic liquid, ion pair based and ultrasound-assisted dispersive liquid–liquid microextraction

Abstract

A new and green extraction method has been developed for the preconcentration of ultra-trace amounts of gold before determination by graphite furnace atomic absorption spectrometry. The preconcentration of gold is based on ionic liquid ion pair formation and ultrasound-assisted emulsification-dispersive liquid–liquid microextraction. The ion pair formed between AuCl4 and benzyldimethyltetradecyl ammonium chloride dihydrate in a microliter-range volume of 1-hexyl-3-methylimidazolium hexafluorophosphate was preconcentrated and a number of factors affecting the formation of the ion pair and the efficiency of the microextraction were investigated and optimized. The following results were obtained under the optimum conditions: an enrichment factor of 123, a precision of ±4.2%, a linear calibration range between 8.0 and 320 ng L−1 and a detection limit of 2.0 ng L−1 in the original solution. The method was successfully applied to the determination of gold in hair and water samples and in a certified reference material.

Graphical abstract: GFAAS determination of gold with ionic liquid, ion pair based and ultrasound-assisted dispersive liquid–liquid microextraction

Article information

Article type
Paper
Submitted
05 Aug 2014
Accepted
19 Sep 2014
First published
19 Sep 2014

J. Anal. At. Spectrom., 2014,29, 2343-2348

GFAAS determination of gold with ionic liquid, ion pair based and ultrasound-assisted dispersive liquid–liquid microextraction

H. Fazelirad, M. A. Taher and M. Nasiri-Majd, J. Anal. At. Spectrom., 2014, 29, 2343 DOI: 10.1039/C4JA00272E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements