Issue 18, 2014

Laser-induced vibration of a thin soap film

Abstract

We report on the vibration of a thin soap film based on the optical radiation pressure force. The modulated low power laser induces a counter gravity flow in a vertical free-standing draining film. The thickness of the soap film is then higher in the upper region than in the lower region of the film. Moreover, the lifetime of the film is dramatically increased by a factor of 2. Since the laser beam only acts mechanically on the film interfaces, such a film can be employed in an optofluidic diaphragm pump, the interfaces behaving like a vibrating membrane and the liquid in-between being the fluid to be pumped. Such a pump could then be used in delicate micro-equipment, in chips where temperature variations are detrimental and even in biological systems.

Graphical abstract: Laser-induced vibration of a thin soap film

Article information

Article type
Paper
Submitted
28 May 2014
Accepted
30 Jun 2014
First published
30 Jun 2014

Lab Chip, 2014,14, 3525-3529

Author version available

Laser-induced vibration of a thin soap film

O. Emile and J. Emile, Lab Chip, 2014, 14, 3525 DOI: 10.1039/C4LC00626G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements