Issue 2, 2014

Novel synthesis of core–shell urchin-like ZnO coated carbonyl iron microparticles and their magnetorheological activity

Abstract

The overall stability (thermo-oxidation, sedimentation) of MR suspensions is a crucial problem decreasing their potential applicability in real life. In this study the unique functional coating of carbonyl iron (CI) particles with ZnO structures was presented in order to develop a new MR suspension based on the core–shell ZnO/CI urchin-like dispersed particles. The two-step synthesis provides the suitable core–shell particles with improved sedimentation and also thermo-oxidation stability. Moreover, due to the enhanced sedimentation stability core–shell based suspensions exhibit higher values of the yield stress than those of bare CI based suspensions at 20 wt% particle concentration. The suspension with 60 wt% particle concentration reaches values of the yield stress around 2.2 kPa at 272 mT. The excellent MR efficiency of the core–shell ZnO/CI based suspension at elevated temperatures was observed. Finally, the dimorphic particle based suspension was prepared when the ratio between the carbonyl iron and core–shell urchin-like particles was 1 : 1. The highest yield stress was obtained in the case of a dimorphic particle-based suspension due to the good magnetic properties of the bare carbonyl iron and mechanical gripping between core–shell ZnO/CI urchin-like particles.

Graphical abstract: Novel synthesis of core–shell urchin-like ZnO coated carbonyl iron microparticles and their magnetorheological activity

Article information

Article type
Paper
Submitted
10 Sep 2013
Accepted
06 Nov 2013
First published
08 Nov 2013

RSC Adv., 2014,4, 996-1003

Novel synthesis of core–shell urchin-like ZnO coated carbonyl iron microparticles and their magnetorheological activity

M. Machovsky, M. Mrlik, I. Kuritka, V. Pavlinek and V. Babayan, RSC Adv., 2014, 4, 996 DOI: 10.1039/C3RA44982C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements