Due to the ever increasing demand for integrated microfluidic devices, an advanced fabrication method is required to expand their capabilities in many research areas. We propose a three-dimensional (3D) printing technique for production of functional modules and demonstrate their assembly into integrated microfluidic device for non-expert users.
K. G. Lee, K. J. Park, S. Seok, S. Shin, D. H. Kim, J. Y. Park, Y. S. Heo, S. J. Lee and T. J. Lee, RSC Adv., 2014, 4, 32876 DOI: 10.1039/C4RA05072J
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Please wait while we load your content...
