Issue 33, 2014

A facile molecular precursor-based Cu(In,Ga)(S,Se)2 solar cell with 8.6% efficiency

Abstract

A simple, safe, and clean molecular precursor-based solution method was developed to fabricate a Cu(In,Ga)(S,Se)2 absorber layer. Low-cost and versatile thioacetic acid was deployed as an effective solvent and suitable sulfur source to dissolve the starting materials, generating a high power conversion efficiency of 8.6% in the final cell.

Graphical abstract: A facile molecular precursor-based Cu(In,Ga)(S,Se)2 solar cell with 8.6% efficiency

Supplementary files

Article information

Article type
Communication
Submitted
31 Mar 2014
Accepted
19 Jun 2014
First published
20 Jun 2014

J. Mater. Chem. A, 2014,2, 13237-13240

A facile molecular precursor-based Cu(In,Ga)(S,Se)2 solar cell with 8.6% efficiency

Y. Xie, H. Chen, A. Li, X. Zhu, L. Zhang, M. Qin, Y. Wang, Y. Liu and F. Huang, J. Mater. Chem. A, 2014, 2, 13237 DOI: 10.1039/C4TA01540A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements