Issue 36, 2014

Chitosan films containing mesoporous SBA-15 supported silver nanoparticles for wound dressing

Abstract

Chitosan films containing mesoporous SBA-15 supported silver nanoparticles (AgNPs) were prepared to be applied as a potential wound dressing material. First SBA-15–silver nanoparticle (SBA-15–Ag) composite materials were prepared by a controlled annealing process without the use of organic solvents and reagents. The SBA-15–AgNPs were characterized in detail by X-ray powder diffraction, field emission scanning electron microscopy and transmission electron microscopy which evidenced the presence of uniformly distributed silver nanostructures inside the silicate pores. UV-vis spectra of the sample showed a band at 430 nm characteristic of the surface plasmon resonance of silver nanoparticles with a diameter below 10 nm and X-ray photoemission spectra confirmed the formation of metal-nanoparticles on the silicate template. Then SBA-15–Ag was used to prepare chitosan films which were characterized in detail. In particular, they showed good hydration properties, water vapor transmission rate and mechanical properties. After hydration films exhibited good antimicrobial activity against both Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus epidermidis and S. aureus) bacteria.

Graphical abstract: Chitosan films containing mesoporous SBA-15 supported silver nanoparticles for wound dressing

Supplementary files

Article information

Article type
Paper
Submitted
07 Jun 2014
Accepted
02 Jul 2014
First published
02 Jul 2014

J. Mater. Chem. B, 2014,2, 6054-6063

Chitosan films containing mesoporous SBA-15 supported silver nanoparticles for wound dressing

V. Ambrogi, A. Donnadio, D. Pietrella, L. Latterini, F. A. Proietti, F. Marmottini, G. Padeletti, S. Kaciulis, S. Giovagnoli and M. Ricci, J. Mater. Chem. B, 2014, 2, 6054 DOI: 10.1039/C4TB00927D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements