Issue 39, 2014

Optical and structural properties of Nd doped SnO2 powder fabricated by the sol–gel method

Abstract

We report on the structural and optical properties of undoped and neodymium doped SnO2 powders (0, 1, 3, and 5 at% of Nd) synthesized by the sol–gel method. SEM and TEM microscopy techniques reveal a nanometric scale of the powders. We show that the tetragonal rutile phase is achieved after annealing at 700 °C. The crystallite size of the doped SnO2 is found to decrease gradually with the increase of Nd content without changing the SnO2 structure. A strong decrease in the intensity of the Raman peaks is noted for doped powders, which can be attributed to the location of Nd3+ ions at the Sn sites indicating Nd incorporation into the host matrix. For the first time the optical properties were studied by UV-Vis-NIR spectroscopy and revealed Nd related absorption bands in the SnO2 matrix. The investigation of the photoluminescence properties shows broad emission centred around 550–650 nm originating from defects present in the SnO2 host matrix. Under 325 nm laser excitation, a strong photoluminescence of trivalent Nd is observed in the infrared region and shows Nd related emission peaks at 885, 1065, and 1336 nm. Such a strong PL signal under laser excitation indicates that Nd3+ is optically active. The excitation dependent PL (PLE) recorded in the 450–700 nm range confirms the presence of active Nd3+ successfully inserted into the SnO2 host matrix.

Graphical abstract: Optical and structural properties of Nd doped SnO2 powder fabricated by the sol–gel method

Article information

Article type
Paper
Submitted
06 Jun 2014
Accepted
11 Aug 2014
First published
12 Aug 2014

J. Mater. Chem. C, 2014,2, 8235-8243

Author version available

Optical and structural properties of Nd doped SnO2 powder fabricated by the sol–gel method

K. Bouras, J.-L. Rehspringer, G. Schmerber, H. Rinnert, S. Colis, G. Ferblantier, M. Balestrieri, D. Ihiawakrim, A. Dinia and A. Slaoui, J. Mater. Chem. C, 2014, 2, 8235 DOI: 10.1039/C4TC01202J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements