Issue 19, 2015

Highly sensitive electrochemical sensor for toxic ractopamine based on the enhancement effect of acetylene black nanoparticles

Abstract

A highly sensitive electrochemical sensor for toxic ractopamine (RAC) was developed using an acetylene black (AB) nanoparticle-modified glassy carbon electrode (AB/GCE). Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Raman tests suggested that AB had a large active surface area, high electron transfer capacity and abundant surface defects. Scanning electron microscopy (SEM) characterization indicated that the AB was composed of a highly porous structure. The fabricated AB/GCE exhibited a remarkable signal enhancement effect toward the oxidation of ractopamine compared to the bare GCE and the graphite modified GCE (graphite/GCE). The oxidation current of ractopamine was recorded using differential pulse voltammetry (DPV) and the optimum experimental conditions were also investigated. Based on the strong signal enhancement effect of AB, a simple, sensitive and rapid electrochemical method was developed for the detection of toxic RAC. The linear range was from 1 μg L−1 to 2 mg L−1 and the detection limit (S/N = 3) was as low as 0.5 μg L−1 (1.6 nM). Finally, the method was successfully applied in the detection of ractopamine in pork samples, and the recovery was in the range from 93.0–106.3%.

Graphical abstract: Highly sensitive electrochemical sensor for toxic ractopamine based on the enhancement effect of acetylene black nanoparticles

Article information

Article type
Paper
Submitted
24 Jun 2015
Accepted
03 Aug 2015
First published
07 Aug 2015

Anal. Methods, 2015,7, 8069-8077

Highly sensitive electrochemical sensor for toxic ractopamine based on the enhancement effect of acetylene black nanoparticles

R. Wang, K. Wu and C. Wu, Anal. Methods, 2015, 7, 8069 DOI: 10.1039/C5AY01625H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements